How to Remove Mould Like a Pro – Step-by-Step Guide Using our Protectus Mould Eradication Kit™

How to Remove Mould Like a Pro – Step-by-Step Guide Using our Protectus Mould Eradication Kit™

Say goodbye to mould for good with this easy-to-follow guide that shows you exactly how to use our Protectus Mould Eradication Kit™ for lasting results. Whether you’re a homeowner, landlord, or property manager, this all-in-one kit gives you the tools and products you need to remove mould safely, clean surfaces thoroughly, and help prevent it from coming back.

What’s Inside the Protectus Mould Eradication Kit™

  • Protectus Mould Killer™ (500 ml) – Kills mould at the root, removes biofilm, and is EN-standard tested.
  • Protectus Mould Stain Remover™ (500 ml) – Lifts and washes away mould stains after the mould is killed.
  • Specialist Brushes – Tile brush for grout, crevice brush for tight spaces, and scrub brush for stubborn areas.
  • Oversized Microfibre Cloths – Soft, absorbent, and non-abrasive for streak-free cleaning.
  • Collapsible Bucket – Compact and easy to store, perfect for rinsing cloths and brushes.
  • Heavy-Duty Gloves & FFP3 Mask – Keep your hands and lungs protected from mould during cleaning.

Preparation: Setting Up for Success

Before you start:

  1. Clear the area – Move furniture and items away from the affected surface.
  2. Ventilate – Open windows and ensure good airflow.
  3. Wear your PPE – Wear heavy-duty gloves and an FFP3 mask to safeguard against mould spores while treating the affected area.
  4. Check surfaces – Identify all visible mould patches and stains so you can treat them thoroughly.

Step 1: Kill Mould at the Root with Protectus Mould Killer™

  • Spray Protectus Mould Killer directly onto the affected area until it is evenly coated.
  • Allow the product to sit for 15 minutes (follow label instructions for exact contact time).
  • The formula penetrates the mould structure, killing its roots, hyphae and spores for long-lasting mould prevention.

Step 2: Remove Stains with Protectus Mould Stain Remover™

  • Once the mould is dead, it’s time to tackle the discolouration it leaves behind.
  • Spray the Mould Stain Remover onto the treated surface.
  • Allow a few minutes for the detergent to lift the stain.
  • Use the tile brush for grout lines or the crevice brush for tight corners.
  • Wipe clean with a fresh microfibre cloth, rinsing it in the collapsible bucket as needed.

Step 3: Use the Right Tools for a Professional Finish

  • Scrub Brush – For large, flat areas that need more friction.
  • Tile Brush – Designed for grout and narrow spaces between tiles.
  • Crevice Brush – Gets deep into edges, corners, and gaps where mould hides.
  • Microfibre Cloths – Wipe, polish, and remove residue without scratching surfaces.
  • Collapsible Bucket – Keep it filled with clean water to rinse tools regularly.

Step 4: Dry the Area and Do a Final Check

  • Once the cleaning is complete, dry the area thoroughly with a clean, dry microfibre cloth.
  • Check for any missed spots and repeat the treatment if necessary.
  • Dispose of used cleaning water safely and wash your tools before storing them.

Step 5: Prevent Mould from Coming Back

  • Keep the area well-ventilated, especially after showers or cooking.
  • Wipe down wet surfaces daily.
  • Fix leaks immediately.
  • Regularly inspect high-risk areas such as bathrooms, kitchens, and basements.

By following this step-by-step process, you can achieve professional-quality mould removal without expensive call-outs or harsh chemicals. Our Protectus Mould Eradication Kit™ gives you everything you need, from targeted cleaning formulas to specialist tools and protective gear, so you can tackle mould confidently and keep your home healthier for longer.

Ready to get started?
Shop our Protectus Mould Eradication Kit™ Now

Back to blog